Norm / STD | Description |
---|---|
ASTM E415 | Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry |
GB 8410 | Flammability of automotive interior materials |
GB/T 10125 | Salt spray test |
GB/T 1733 | Water resistance test |
GB/T 228.1 | Streching test |
GB/T 230.1 | Hardness Test - Rockwell |
GB/T 231.1 | Hardness Test - Brinell |
GB/T 2423.10 | Vibration test |
GB/T 30512 | Requirements for prohibited substances in automobiles |
GB/T 4340.1 | Hardness Test - Vickers |
MS 191-53 | Coating adhesion |
MS 200-41 | Streching test |
MS 201-02 | Prohibition of use of heavy metal for automotive parts. Heavy metal detection. |
MS 210-05 | Molded plastic parts - Interior. Lightfatness test |
MS 210-05 | Molded plastic parts - Interior. Weathering test |
MS 210-05 | Scratch resistance test |
MS 210-06 | Molded plastic parts - Exterior use. Lightfatness test |
MS 210-06 | Molded plastic parts - Exterior use. Weathering test |
MS 210-06 | Molded plastic parts - Exterior use. Heat resistance cycle test. |
MS 252-08 | Streching test |
MS 252-08 | Compression hardness |
MS 257-06 | Compression hardness |
MS 257-07 | Streching test |
MS 269-03 | Ozone test |
MS 300-08 | Flammability resistance - Interior materials |
MS 300-32 | Streching test |
MS 300-34 | Odor Test |
MS 300-54 | Fogging Test |
MS 300-55 | Determination of volatile organic compounds from vehicle interior parts VOCs |
MS 300-57 | Test method for VOCs emission from part assembly |
MS 322-06 | Streching test |
MS 341-17 | Streching test |
MS 625-01 | Impact resistance |
MS 625-02 | Salt spray test |
MS 630-01 | Salt spray test |
MS 630-01 | Impact resistance |
MS 652-12 | Humidity resistance cycle test |
MS 652-14 | Humidity resistance cycle test |
MS 652-14 | Impact resistance |
MS 652-15 | Humidity resistance cycle test |
MS 652-27 | Humidity resistance cycle test |
MS 655-08 | Impact resistance |
Let us know more about your requirement, contact us.